Added Components

So the boat now has:

2 AMERESCO - Crystalline Silicon Photovoltaic Modules

Samlex Solar - SCC-30AB - 30 Amp Charge Controller

ICOM - IC-M802 - Single Sideband Radio Transceiver

ICOM - AT-140 Antenna Tuner

KISS - Ground Plane

Gam Split Antenna Mounted on Port Side Backstay

Pactor IV Bluetooth Modem

ZF - Bronze Propeller

Teak Time!!

Cleaned out the cockpit and oiled the teak cockpit table, but also cleaned and oiled the teak treads up to the cockpit and the teak on the swim platform and stairs.  I love the look of oiled teak.

Cleaned, dried and then oiled

Step from the fantail up toward the cockpit

Another one of the teak steps, this one 

from the side deck to the cockpit

Update - Back In The Water

Here are the photos of the travel lift move back to the water:

New Bronze ZF Prop

Positioning the Travel Lift

Travel Lift In Place

Removing the Cribbing

On the Move

Now Moving Into Place To Lower Into The Water

Lowering Terratima...

...Into The Water

Third Week

We are not very happy right now.  The group doing the work on our boat has no concept of schedule, nor do they seem capable of communicating the issues with us.  In my business, I can not afford that kind of behaviour, so we remain high and dry and the outlook for sailing this coming Easter is fast disappearing.  I'll try and get some minor other work done while the sun is shining, but this experience and the experience with the people who commissioned our boat is leaving a very bad taste in our mouths.

UPDATE II

Here are photos of progress:

Up on the hard still

Icom AT-140

New Bronze Prop

New ICOM M-802 SSB Main Box

SSB Location at the Nav Station

Update

I will have pictures tomorrow, but here is the checklist:

1. Solar Panels - Mounted and about to be wired
2. Flood Lights - Mounted and about to be wired
3. Zincs - In place
4. New Prop - In the shop but to be mounted tomorrow
5. SSB - front end unit in, guts to be placed tomorrow
6. ICOM 140 - in the shop but not yet mounted
7. Antenna - not yet mounted
8. Grounding Plane - not yet mounted.  

Will update everyone soon.

Work on Land

As the page on "Life Ashore" suggests, I am working in an office like many others and on a number of projects at the moment.  All are exciting in their own way, but this one for the University of Alberta is special in many ways.  When I was the University Architect and Senior Planner for the University, I could see the potential of this building that had started life in 1922 as the University's Medical School.  After World War II, the end wings were extended in 1946 and '47.  In 1951, there was an addition that started to turn the "U" shaped building into an "E".  That addition was only 1 story at the time.  Then in 1958, a major (and unsympathetic) addition was added that filled up the middle leg of the "E" and closed the open ends with a 7 storey addition.  So the entire thing looks like this:



The result is a very difficult building.  It is huge at roughly 355,000 square feet and  difficult to move around within.  The two courtyards are simply light wells at the moment and often cars are parked inside them.

The idea was to consolidate the building into an easily understood one that would become the University's administration building.  Our approach is to take out the middle wing and make the entire interior an atrium-like space.  The issue is that it would be long and narrow, but since we would be taking out some area from the centre wing, we would replace that within one side of the atrium, so here are images of how it has turned out:

Exterior from the south



Interior from the west end of the atrium



View looking at the east end infill space

Looking the other way (toward the west)